Fujitsu PRIMEQUEST 500A Series Installation Manual page 174

CHAPTER 3 Operating System Installation
5 Make the following selection, and press the [Enter] key:
• FC
Emulex LPX000 PCI Fibre Channel HBA
• SCSI
LSI Logic PCI Fusion-MPT Driver (Server 2003 IA64)
• SAS
LSI Logic Fusion-MPT SAS Driver (Server 2003 IA64)
Note:
8
Continue installation by following the instructions from the setup program.
For details, see the OS manual.
When a message requesting a floppy disk appears during installation, insert the
driver disk, and press the [Enter] key.
Remarks: The setup program requests a product ID during installation. The
Installed operating
Windows Server 2003,
Enterprise Edition for
Itanium-based Systems
Windows Server 2003,
Datacenter Edition for
Itanium-based Systems
*1: For the CoA sticker location, see the "Important Notice" that comes with the
main unit.
*2: If the CoA sticker is one of the supplied items, be sure to read the bundled
"Important Notice" and then affix the sticker to the main unit.
*3: Use a CoA sticker with an "Enterprise" marking. If more than one CoA
sticker has that marking, be careful not to use more than one product ID
during installation.
*4: Use a CoA sticker of the Datacenter that carries a "4 CPU" marking.
3-52
Do not remove the USB floppy disk drive until installation is
completed.
product ID location varies depending on the installed operating
system and purchase method.
Table 3.11 Product ID locations
system
Volume license
Hardware-bundled
Hardware-bundled
Purchase method Product ID location
CD case containing
operating system media
CoA sticker that is affixed
to the main unit or a
supplied item (*1) (*2) (*3)
CoA sticker that is affixed
to the main unit or a
supplied item (*1) (*2) (*4)
C122-E001-10EN