Fujitsu PRIMEQUEST 500A Series Installation Manual page 339

CHAPTER 5 Security Setup
1
5.1 Security Settings
This chapter describes the settings required for security and how to report errors that
occur during operation.
Considering the operation conditions, specify the required security settings.
It is recommended to back up the setup information after completing the following
setup tasks. For backing up the settings made here, see
Configuration Information."
Access control setting
System SNMP setting
Specifying SSH parameters
Specifying HTTPS parameters
C122-E001-10EN
→
( 5.1.1)
→
( 5.1.2)
→
( 5.1.3)
→
( 5.1.4)
Section 2.6, "Saving
5-1