Fujitsu PRIMEQUEST 500A Series Installation Manual page 168

CHAPTER 3 Operating System Installation
4 When the following window is displayed, enter the product key, and press the
[Enter] key.
Next, when the password input window is displayed, enter a password, and press
the [Enter] key. (The password input window is displayed only in custom
installation.)
5
When the following window is displayed, the operating system restarts.
Do not press any key for key input until it restarts, though the restart takes about
15 minutes.
3-46
Figure 3.24 Product key input window
Figure 3.25 OS restart window
C122-E001-10EN