Fujitsu PRIMEQUEST 500A Series Installation Manual page 308

CHAPTER 4 Work Required After Operating System Installation
(3) Rebooting the system
The system is automatically rebooted. Wait until the system reboot is complete.
(4) Confirming that the dump has been collected
Perform the following to confirm that the dump has been collected:
• Confirm that a directory with the name "127.0.0.1-[date-and-time]" has been
created in the dump saving area.
Note: If "UTC = false" is set in /etc/sysconfig/clock, the displayed date/time is 9
• Confirm that the dump is collected or the size of vmcore under the above
directory is more or less the same as the estimated size of the dump file.
Because the dump saving area is not mounted with the operating kernel, confirm the
dump collection as stated above after mounting the dump saving area.
(5) Deleting the dump
Use the rm command to delete the collected test dump. Finally, unmount the dump
saving area.
4-122
hours added to the date/time of dump collection. Be careful not to
mistake it for the date/time of dump collection.
C122-E001-10EN