Fujitsu PRIMEQUEST 500A Series Installation Manual page 184

CHAPTER 3 Operating System Installation
3.3.7 Work required after installation
3.3.7.1 Setting the display adapter (PRIMEQUEST 500A/500 series)
If the ATI RAGE XL display driver supplied in the same package as Microsoft®
Windows Server® 2003 Enterprise Edition is used with a PRIMEQUEST 500A/500
series machine, the same problem as described in Microsoft Technical Information
KB924897 will probably occur. Follow the procedure below to use the standard VGA
driver. If high resolution is required, such as for application installation, use the
remote desktop function.
1 Click [Control Panel]
2
Select the [Hardware] tab, and then start Device Manager.
3
Select and right-click "RAGE XL PCI Family" from Display Adapter, and then
select [Disable] from the menu.
4 Restart the system according to the popup instruction.
3.3.7.2 Installing the multipath driver
After setting up the operating system in a single-path environment, make Fibre
Channel cable settings in a multipath environment. Install the multipath driver, and
then make the cable settings in the multipath environment.
Notes:
• Do not establish a multipath connection between the PRIMEQUEST machine and
SAN storage before installing the multipath driver. Doing so may result in data
destruction. For details on multipath driver installation and the multipath
connection, see the ETERNUS Multipath Driver V2.0 User's Guide for
Windows
• To use the system in a single-path environment, install the ETERNUS device
driver. For details, see the information available under the following URL.
ETERNUS device driver, GR device driver:
http://storage-system.fujitsu.com/jp/download/grdvdr/
3-62
→
[System].
(
R).
C122-E001-10EN