Fujitsu PRIMEQUEST 500A Series Installation Manual page 371

External interface
RS-232C
LAN
3
Turn on the general-purpose PC to start terminal software.
Make the following terminal software settings.
C122-E001-10EN
Table B.1 MMB external interfaces
1
100Base-TX 3
Table B.2 Terminal software settings
Setting item
Bits per second
Data bits
Parity
Stop bit
Flow control
Emulation
Quantity
Used by a Fujitsu certified service
engineer to set up the unit. It is not
used in normal operation.
• User: Used for a console connection
• Maintenance:
[LOCAL]: Dedicated for use by a
Fujitsu certified service engineer
[REMOTE]: REMCS port
Value
19200
8
None
1
Not applicable
VT100
B.1 Connecting a General-purpose PC
Remarks
B-3