Fujitsu PRIMEQUEST 500A Series Installation Manual page 388

Appendix C Power Control
C.3 Powering On and Powering Off Partitions
This section explains how to power on and power off partitions as follows:
Partition power-on procedures
Partition power-off procedures
The power-on and power-off procedures for partitions require Admin authority.
C.3.1 Partition power-on procedures
This section explains the partition power-on procedures.
Procedure
1
Log in to MMB Web-UI.
The MMB Web-UI window is displayed.
2 Click [Partition]
The [Power Control] window is displayed. This window displays only the
partitions that are bootable with SBs and IO Units assigned.
The # column shows partitions numbers.
For details about the [Power Control] window, see Part III, "MMB," in the
PRIMEQUEST 580A/540A/520A/500/400 Series Reference Manual: Basic
Operation/GUI/Commands (C122-E003EN).
3
To turn on a partition, select [Power On] for it in the [Power Control] column, and
click the [Apply] button.
A confirmation dialog box appears. Click the [OK] button to continue; otherwise,
click the [Cancel] button.
Note: If the specified control fails because the partition is already powered on or
C-14
→
[Power Control] from the MMB menu.
Figure C.8 [Power Control] window
is being powered off, a warning message appears.
(→ C.3.1)
(→ C.3.2)
C122-E001-10EN