Fujitsu PRIMEQUEST 500A Series Installation Manual page 177

Installation
Use terminal connection software to establish a connection. HyperTerminal is
supplied as the standard terminal connection software for WindowsXP. This section
shows an example of using Tera Term on a PC.
Set up the terminal software as follows.
Prepare and apply driver disks in advance by following steps 3 in
"Installing Windows,"
procedure below to make the appropriate settings.
1
Start Tera Term. When the following window is displayed, press the [ESC] and
[TAB] keys.
C122-E001-10EN
Table 3.12 Setting items of the terminal software
Setting item
Bits/second
Data bits
Parity
Stop bit
Flow control
Emulation
When text setup on the blue screen is completed, follow the
Figure 3.29 Tera Term startup window
3.3 Windows Installation
Value
19200
8
None
1
None
VT100
Section 3.3.4.3,
3-55