Fujitsu PRIMEQUEST 500A Series Installation Manual page 143

3 Specify the user management information in the [Edit User] window, and click
the [Apply] button.
• User Name: Specify a user name (consisting of at least 8 and up to 16
characters).
• Password: Specify a password (consisting of at least 8 and up to 16
characters).
• Confirm Password: Enter the specified password again for confirmation.
• Privilege: Select Admin.
• Status: Select Enabled.
(3) Setting up the deployment server
1
Register the partition on which you are installing the Linux OS, in the
deployment server. For this purpose, use the GUI environment (deployment
console) provided by SystemcastWizard Lite. For information on the procedure,
see the PRIMEQUEST SystemcastWizard Lite User's Guide (C122-E010EN).
(4) Obtaining resources required for installation
For the resources required for installation using SystemcastWizard Lite, see the
PRIMEQUEST SystemcastWizard Lite User's Guide (C122-E010EN).
(5) Checking the statuses of the required service functions
Check the service statuses on the deployment server by checking the following:
• Whether you can use TFTP service required for network booting
• Whether you can use FTP service required to install the OS in network
environments
• Whether you can use DHCP service to assign an IP address to each
PRIMEQUEST partition and whether the service is correctly configured
3.2.3.3 Installing the Linux OS
Create resources on the deployment console, and issue a request to install Linux.
For information on the procedure, see the PRIMEQUEST SystemcastWizard Lite
User's Guide (C122-E010EN).
C122-E001-10EN
3.2 Linux Installation
3-21