Fujitsu PRIMEQUEST 500A Series Installation Manual page 157

3.3.3.3 Creating the installation floppy disk
Start Installation Support Tool for Windows. Insert the Drivers CD into the PC that
you have prepared, and run the following program from Explorer:
E:\Tools\General\IST\ISTWin.exe (where the CD-ROM drive is Drive E)
3.3.3.4 Beginning Windows setup
The procedure is as follows:
Set up the device.
Turn on power to partitions.
Execute the installation preparation
script.
Begin Windows setup.
Install the High-Reliability Tools.
For details, see the PRIMEQUEST Installation Support Tool for Windows User's
Guide (C122-048EN).
C122-E001-10EN
1 Remove the storage devices in which Windows is not to be
installed.
2 Connect the USB floppy disk drive.
3 Set PCI address mode
(PRIMEQUEST 580A/540A/580/540/480/440).
4 Connect the DVD drive, display, mouse, and keyboard.
5 Insert the installation floppy disk and Drivers CD.
1 Start up from the Windows installation DVD.
2 The EMS detection dialog box is displayed
3 Agree to the license agreement.
4 Install components.
3.3 Windows Installation
3-35