Transferring The Device Configuration To Another Device - Weinmann MEDUCORE Standard2 Instructions For Use Manual

5 Operation
5.15 Transferring the device configuration
Result
102 EN MEDUCORE Standard
to another device
Using the device's SD card, you can transfer settings saved in the
operator menu to another device.
Risk of injury from different alarm presets in the same or
similar devices!
Different alarm presets in the same or similar devices in different
application areas can confuse the user and result in injury to the
patient.
⇒ Select the same alarm presets in the same or similar devices.
1. Switch on the device
76).
The start menu appears.
2. Call up the operator menu with the menu key
(see "8.1 Navigating the operator menu", page
3. Select System settings | SD card | Export device
configuration to SD card.
4. Confirm with OK.
5. Remove the SD card
74).
6. Insert the SD card into another device
SD card", page
7. Switch on the device
76).
The start menu appears.
8. Call up the operator menu with the menu key
(see "8.1 Navigating the operator menu", page
9. Select System settings | SD card | Import device
configuration from SD card.
10. Confirm by pressing OK to start importing.
The device settings have been transferred to another device.
2
(see "5.1 Switching the device on", page
(see "4.8.2 Removing the SD card", page
73).
(see "5.1 Switching the device on", page
and enable
117).
(see "4.8.1 Inserting an
and enable
117).