Table of Contents
Advertisement
Do not attempt to lubricate the cutting-plotter
mechanisms.
l Such action may cause it to break down.
Prohibited
Provide sufficient space around the plotter so that
it does not strike any objects in its vicinity during
cutting.
l Such contact may cause misalignment in cutting or
plotting.
Do not touch
When using the cutter, take care not to extend the
blade more than necessary.
l An overly extended blade will damage the cutting mat and
adversely affect the cutting quality.
Special Precautions on Handling Blades
Sharp cutter blades are used with this plotter. Handle the cutter blades and holders with care to prevent
bodily injury.
Cutter Blades
Cutter blades are very sharp. While handling a cutter blade or cutter pen, be careful to avoid cutting your
fingers or other parts of your body. Promptly return used blades to the cutter case provided. When the case is
completely filled, discard the used blades together with the case.
Cutter Pens
The tip consists of a sharp blade. Be sure not to extend it too far. Moreover, when you are not using the cutter
pen, make sure that the blade is fully retracted.
Safety Precautions
CAUTION
Do not clean the plotter using volatile solvents
such as thinner or benzene.
l Such locations may impair the performance of the plotter.
Prohibited
When using indoor lighting such as fluorescent
or other electrical lamps, provide a distance of at
least one meter between the plotter and the light
source.
l Close proximity of such a light source may cause the
sensor to malfunction and prevent proper size detection of
the media.
Move the tool carriage slowly when moving it
manually in order to load the medium or for other
reasons.
l Moving it quickly may damage the plotter.
v
Advertisement
Table of Contents
Troubleshooting
