Regenerative Resistors And Brake Power Supply Units - YASKAWA SGM H Series User Manual

2 Selections

2.6.4 Regenerative Resistors and Brake Power Supply Units

2.6.4 Regenerative Resistors and Brake Power Supply Units

Main Circuit
Power Supply
Capacity
Single-phase
100 V
Single-phase
200 V
Three-phase
200 V
* 1. For the optional JUSP-RA04 Regenerative Resistor Unit.
* 2. For the optional JUSP-RA05 Regenerative Resistor Unit.
* 3. Be careful when connecting the power supply for 24 VDC brake to the local power supply. The local power
supply cannot apply the overvoltage such as surge to the output side, and the output side may be damaged even
if the voltage is applied. Never fail to use the surge suppressor.
Note: 1. If the SERVOPACK cannot process the regenerative power, an external regenerative resistor is required.
Refer to 5.8.6 External Regenerative Resistor, 5.8.7 Regenerative Resistor Unit, and 6.5 Connecting Regen-
erative Resistors.
2. The following table shows the manufacturers of each device.
Peripheral Device
External Regenerative Resistor
External Regenerative Unit
Brake Power Supply Unit
2-34
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
SERVOPACK Model
SGDM-
(kW)
0.03 A3BD, A3BDA
0.05 A5BD, A5BDA
0.10 01BD, 01BDA
0.20 02BD, 02BDA
0.03 A3AD, A3ADA
0.05 A5AD, A5ADA
0.10 01AD, 01ADA
0.20 02AD, 02ADA
0.40 04AD, 04ADA
0.45 05AD, 05ADA
0.75 08AD, 08ADA
1.0 10AD, 10ADA
1.5 15AD, 15ADA
2.0 20AD, 20ADA
3.0 30AD, 30ADA
5.0 50ADA
6.0 60ADA
7.5 75ADA
11.0 1AADA
15.0 1EADA
Iwaki Wireless Research Institute
Yaskawa Electric Corporation
Yaskawa Controls Co., Ltd.
Regenerative Resistor
(Refer to 5.8.6, 5.8.7, and 6.5.)
Built-in
Resistance Capacity
(Ω) (W)
− −
50 60
30 70
25 140
12.5 140
8 280
∗1 ∗1
(6.25） (880)
∗2 ∗2
(3.13) (1760)
Manufacturer
Brake Power Supply
Unit
Externally
(Refer to 5.8.5.)
connected
24 VDC brake (provided
by a customer)
90 VDC brake
• LPDE-1H01
−
for 100 VAC input
• LPSE-2H01
for 200 VAC input
−
JUSP-RA04
JUSP-RA05
∗3