YASKAWA SGM H Series User Manual page 599

Parameter
No.
Pn50D Input Signal Selections 4
3rd 2nd
4th
digit digit
digit
n.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Name Setting Range
1st
digit
/ZCLAMP Signal Mapping (Zero clamp when ON (L-level))
(Refer to "8.5.6 Using the Zero Clamp Function.")
ON when CN1-40 input signal is ON (L-level).
0
1
ON when CN1-41 input signal is ON (L-level).
ON when CN1-42 input signal is ON (L-level).
2
3 ON when CN1-43 input signal is ON (L-level).
ON when CN1-44 input signal is ON (L-level).
4
ON when CN1-45 input signal is ON (L-level).
5
ON when CN1-46 input signal is ON (L-level).
6
Sets signal ON.
7
Sets signal OFF.
8
9
ON when CN1-40 input signal is OFF (H-level).
A
ON when CN1-41 input signal is OFF (H-level).
B ON when CN1-42 input signal is OFF (H-level).
C
ON when CN1-43 input signal is OFF (H-level).
ON when CN1-44 input signal is OFF (H-level).
D
E ON when CN1-45 input signal is OFF (H-level).
ON when CN1-46 input signal is OFF (H-level).
F
/INHIBIT Signal Mapping (Reference pulse inhibit when ON (L-level))
(Refer to "8.6.7 Reference Pulse Inhibit Function (INHIBIT).")
0 to F Same as /ZCLAMP
/G-SEL Signal Mapping (Gain change when ON (L-level))
(Refer to "9.4.9 Switching Gain Settings.")
Same as /ZCLAMP
0 to F
Reserved (Do not change)
Factory
Unit
Setting
− −
8888
12.3 List of Parameters
Setting Reference
Validation Section
−
After
restart
12
12-39