YASKAWA SGM H Series User Manual page 373

6 Wiring
6.4.8 DC Reactor for Harmonic Suppression
(2) Connecting a Reactor
Connect a DC reactor as shown in the following diagram. The DC reactor is connected in series to the rectifier
circuit's output side.
Note: 1. The SERVOPACK
Remove the lead wire between these two terminals and connect the DC reactor with SERVOPACK.
2. DC reactor is an option (Provided by customer).
6-30
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
DC Reactor
Three-phase input
SERVOPACK
DC reactor
1 and 2 terminals for the DC reactor are short-circuited before shipment.
1
2