Servopack's Parts Replacement Schedule - YASKAWA SGM H Series User Manual

Table of Contents

11 Inspection, Maintenance, and Troubleshooting

11.2.3 SERVOPACK's Parts Replacement Schedule

The following electric or electronic parts are subject to mechanical wear or deterioration over time. To avoid

failure, replace these parts at the frequency indicated.

Refer to the standard replacement period in the following table, contact your Yaskawa representative. After

an examination of the part in question, we will determine whether the parts should be replaced or not.

The parameters of any SERVOPACKs overhauled by Yaskawa are reset to the factory settings before ship-

ping. Be sure to confirm that the parameters are properly set before starting operation.

Smoothing Capacitor

Aluminum Electrolytic

Capacitor on Circuit Board

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Table 11.8 Periodical Part Replacement

Standard Replacement

4 to 5 years

7 to 8 years

• Ambient Temperature: Annual average of 30°C

• Load Factor: 80% max.

• Operation Rate: 20 hours/day max.

Operating Conditions