A0118 Phase Synchr. Lagless, Encoder 1, Real Master Axis; A0119 Phase Synchr. Lagless, Encoder 2, Real Master Axis - Bosch Rexroth IndraDrive Troubleshooting Manual

Rexroth IndraDrive

A0118 Phase synchr. lagless, encoder 1, real master axis

A0119 Phase synchr. lagless, encoder 2, real master axis

DOK-INDRV*-GEN-**VRS**-WA01-EN-P
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
Supported by Firmware Variant:
The drive is in lagless position control. The position command value is
calculated by the master axis position. The master axis position is derived
from the measuring encoder.
See also Functional Description "Phase Synchronization with Real/Virtual
Master Axis"
A0118 - Attributes
Display: AF
Mess. no.: A0118 (hex)
Supported by Firmware Variant:
The drive is in lagless position control. The position command value is
calculated by the master axis position. The master axis position is derived
from the measuring encoder.
See also Functional Description "Phase Synchronization with Real/Virtual
Master Axis"
A0119 - Attributes
Display: AF
Mess. no.: A0119 (hex)
Status Diagnostic Messages
FWA-INDRV*-MPH02VRS-MS
FWA-INDRV*-MPB02VRS-MS
FWA-INDRV*-MPD02VRS-MS
FWA-INDRV*-MPH02VRS-MS
FWA-INDRV*-MPB02VRS-MS
FWA-INDRV*-MPD02VRS-MS
6-21