Bosch Rexroth IndraDrive Troubleshooting Manual page 408

Rexroth IndraDrive
General conditions:
Mode at time fault occurred:
Operating mode active at time fault occurred:
7-segment display...
Fault status
occurs permanently
occurs during commissioning
occurs sporadically
occurs after approx.
occurs with shocks
depends on temperature
Wiring / mechanical setup (e. g. length of cables, grounding, assembly,...):
Information on the machine (e. g. operating hours, type, serial number,...):
Mains conditions (e. g. frequency, voltage,...):
Ambient conditions (e. g. ambient temperature, humidity,...):
In case of problems with DriveTop
Name of the dialog in which the fault occurred:
Drive connection:
Note: In order to resolve your DriveTop problem quickly, we would like to ask you to send us the file "debug.log". You
can find it in the DriveTop directory.
DOK-INDRV*-GEN-**VRS**-WA01-EN-P
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
Handling, Diagnostic and Service Functions
Fault Report
for Drive Systems
Parameterization mode
...before fault occurred:
Causes
unknown
incorrect connection
external cause
hours mechanical damage
loose cable connection
moisture in unit
foreign body in unit
Fig. 10-2: Fault Report (Page 2 of 2)
Date:
Report No.:
Operating mode Switch phase
, Encoder
...after fault occurred:
Other defects
problems in the mechanical system
power section failure
control system failure
motor failure
cable break
defective blower
defective feedback
10-15
Page 2 of 2
,