Bosch Rexroth IndraDrive Troubleshooting Manual page 406

Rexroth IndraDrive
DOK-INDRV*-GEN-**VRS**-WA01-EN-P
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
Handling, Diagnostic and Service Functions
• Switch main switch off.
• Make sure main switch cannot be switched on again.
• Disconnect plug-in connectors.
Note: When replacing cables, cap open connector ends particularly
if there might be the chance that they get in contact with
coolant/lubricant or dirt (allowed level of contamination is 2
according to EN50178).
• Replace cables.
Material damage caused by bad power
connectors!
⇒ Connect power connectors only when they are dry
and clean.
ATTENTION
• Connect plug-in connectors.
10-13