F2110 Error In Non-Cyclical Data Communic. Of Power Section - Bosch Rexroth IndraDrive Troubleshooting Manual

7-114
Error Messages

F2110 Error in non-cyclical data communic. of power section

Cause
Failure occurs sporadically (firmware error)
Hardware defective
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
Supported by Firmware Variant:
Supported by Supply Unit:
An error occurred in the communication between control section and
power section.
Remedy
Clear error and contact our service department for
firmware update
Should error occur repeatedly, control section or entire
device has to be replaced
Note: Only Rexroth service engineers or especially trained users are
allowed to replace the control section. The replacement of the
entire drive controller is described in the Project Planning
Manual for the power section.
F2110 - Attributes
Display: F2110
Mess. no.: F2110 (hex)
Rexroth IndraDrive
FWA-INDRV*-MPH02VRS-MS
FWA-INDRV*-MPB02VRS-MS
FWA-INDRV*-MPD02VRS-MS
HMV01
DOK-INDRV*-GEN-**VRS**-WA01-EN-P