C3203 Incorrect Input For Voltage; C3202 Incorrect Input For Frequency - Bosch Rexroth IndraDrive Troubleshooting Manual

Rexroth IndraDrive

C3203 Incorrect input for voltage

Cause
List element 2 (rated voltage) in P-0-4032, Type
plate list asynchronous motor is outside of useful
limits

C3202 Incorrect input for frequency

Cause
List element 3 (rated frequency) in P-0-4032, Type
plate list asynchronous motor is outside of useful
limits
DOK-INDRV*-GEN-**VRS**-WA01-EN-P
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
Supported by Firmware Variant:
During the execution of the command P-0-4033, C3200 Command
Calculate data for asynchronous motor an error was detected.
Remedy
Value for rated voltage has to be between 10 V and
2000 V
C3202 - Attributes
Display: C3202
Mess. no.: C3202 (hex)
Supported by Firmware Variant:
During the execution of the command P-0-4033, C3200 Command
Calculate data for asynchronous motor an error was detected.
Remedy
Value for rated frequency has to be between 5 Hz and
3000 Hz
C3203 - Attributes
Display: C3203
Mess. no.: C3203 (hex)
Command Diagnostic Messages
FWA-INDRV*-MPH02VRS-MS
FWA-INDRV*-MPB02VRS-MS
FWA-INDRV*-MPD02VRS-MS
FWA-INDRV*-MPH02VRS-MS
FWA-INDRV*-MPB02VRS-MS
FWA-INDRV*-MPD02VRS-MS
9-113