Status.measurement - Keithley 2651A Reference Manual

Section 7: Command reference
Also see
Status model overview
Status byte and service request (SRQ)

status.measurement.*

This attribute contains the measurement event register set.
Type TSP-Link accessible
Attribute - -
.condition (R) Yes
.enable (RW) Yes
.event (R) Yes
.ntr (RW) Yes
.ptr (RW) Yes
Usage
measurementRegister = status.measurement.condition
measurementRegister = status.measurement.enable
measurementRegister = status.measurement.event
measurementRegister = status.measurement.ntr
measurementRegister = status.measurement.ptr
status.measurement.enable = measurementRegister
status.measurement.ntr = measurementRegister
status.measurement.ptr = measurementRegister
measurementRegister
Details
These attributes are used to read or write to the measurement event registers. Reading a status register returns
a value. The binary equivalent of the returned value indicates which register bits are set. The least significant bit
of the binary number is Bit B0, and the most significant bit is Bit B15. This attribute is used to read or write to the
measurement event registers. For example, assume value 257 is returned for the enable register. The binary
equivalent is 0000 0001 0000 0001. This value indicates that bit B0 (VLMT) and bit B8 (BAV) are set.
B15 B14
** >
0 0
* Least significant bit
** Most significant bit
For information about .condition, .enable, .event, .ntr, and .ptr registers, refer to
2) and Enable and transition registers
meanings:
7-252
Model 2651A High Power System SourceMeter® Instrument Reference Manual
(on page E-4)
(on page E-14)
Affected by
- -
Not applicable
Status reset
Status reset
Status reset
Status reset
The measurement event register's status. A zero (0) indicates no bits set (also
send 0 to clear all bits); other values indicate various bit settings.
B13 B12 B11 B10
> > > >
0 0 0 0
(on page E-18). The individual bits of this register have the following
Where saved
- -
Not saved
Not saved
Not saved
Not saved
Not saved
B9 B8 B7 B6
> > > >
0 1 0 0
Default value
- -
Not applicable
0
0
0
14,723 (all bits set)
B5 B4 B3 B2
> > > >
0 0 0 0
Status register sets
2651A-901-01 Rev. A / March 2011
B1 B0
> *
0 1
(on page E-