Trigger.event_Id; Trigger.timer[N].Clear(); Trigger.timer[N].Count - Keithley 2651A Reference Manual

Model 2651A High Power System SourceMeter® Instrument Reference Manual

trigger.EVENT_ID

This constant contains the command interface trigger event number.
Type TSP-Link accessible
Constant Yes
Usage
eventID = trigger.EVENT_ID
eventID
Details
You can set the stimulus of any trigger event detector to the value of this constant to have it respond to
command interface trigger events.
Also see
None

trigger.timer[N].clear()

This function clears the timer event detector and overrun indicator for the specified trigger timer number.
Type TSP-Link accessible
Function Yes
Usage
trigger.timer[N].clear()
N
Details
This function sets the timer event detector to the undetected state and resets the overrun indicator.
Also see

trigger.timer[N].count

trigger.timer[N].count
This attribute sets the number of events to generate each time the timer is triggered.
Type TSP-Link accessible
Attribute (RW) Yes
2651A-901-01 Rev. A / March 2011
Affected by
The command interface trigger event number
Affected by
Trigger timer number to clear (1 to 4)
(on page 7-339)
Affected by
Instrument reset
Trigger timer N reset
Where saved Default value
Where saved Default value
Where saved Default value
Not saved 1
Section 7: Command reference
7-339