Tsplink.trigger[N].Event_Id; Tsplink.trigger[N].Mode - Keithley 2651A Reference Manual

Section 7: Command reference

tsplink.trigger[N].EVENT_ID

This constant identifies the number that is used for the trigger events.
Type TSP-Link accessible
Constant Yes
Usage
eventID = tsplink.trigger[N].EVENT_ID
eventID
N
Details
This number is used by the TSP-Link trigger line when it detects an input trigger.
Set the stimulus of any trigger event detector to the value of this constant to have it respond to trigger events
from this line.
Also see
None

tsplink.trigger[N].mode

This attribute defines the trigger operation and detection mode.
Type TSP-Link accessible
Attribute (RW) Yes
Usage
mode = tsplink.trigger[N].mode
tsplink.trigger[N].mode = mode
mode
N
Details
This attribute controls the mode in which the trigger event detector and the output trigger generator operate on
the given trigger line.
7-352
Model 2651A High Power System SourceMeter® Instrument Reference Manual
Affected by
The trigger event number.
The trigger line (1 to 3)
Affected by
Instrument reset
TSP-Link trigger N reset
The trigger mode
The trigger line (1 to 3)
Where saved Default value
Where saved Default value
Not saved tsplink.TRIG_BYPASS
2651A-901-01 Rev. A / March 2011