Lan.trigger[N].Connect(); Lan.trigger[N].Connected - Keithley 2651A Reference Manual

Section 7: Command reference

lan.trigger[N].connect()

This function prepares the event generator for outgoing trigger events.
Type TSP-Link accessible
Function Yes
Usage
lan.trigger[N].connect()
N
Details
Prepares the event generator to send event messages. For TCP connections, this opens the TCP connection.
The event generator automatically disconnects when either the lan.trigger[N].protocol or
lan.trigger[N].ipaddress attributes for this event are changed.
Example
lan.trigger[1].protocol = lan.MULTICAST
lan.trigger[1].connect()
lan.trigger[1].assert()
Also see
lan.trigger[N].assert()
lan.trigger[N].ipaddress
lan.trigger[N].overrun
lan.trigger[N].protocol
lan.trigger[N].stimulus
lan.trigger[N].wait()

lan.trigger[N].connected

This attribute stores the LAN event connection state.
Type TSP-Link accessible
Attribute (R) Yes
7-124
Model 2651A High Power System SourceMeter® Instrument Reference Manual
Affected by
The LAN event number (1 to 8)
(on page 7-122)
(on page 7-126)
(on page 7-128)
(on page 7-129)
(on page 7-130)
(on page 7-131)
Affected by
Not applicable
Where saved Default value
Set the protocol for LAN trigger 1 to be
multicast when sending LAN triggers.
Then, after connecting the LAN trigger,
send a message on LAN trigger 1 by
asserting it.
Where saved Default value
Not applicable Not applicable
2651A-901-01 Rev. A / March 2011