Keithley 2651A Reference Manual page 458

Section 7: Command reference
Details
Once a pulse train has been configured and assigned to a tag, it is often desirable to inspect the settings of this
preconfigured pulse train. The QueryPulseConfig() command can be used for this purpose.
This function will return a table containing the various settings associated with the tag input parameter.
Return values:
tostring()
tag
smu
func
bias
level
start
stop
limit
ton
toff
points
buf
sync_in
sync_out
sourcevalues
7-150
Model 2651A High Power System SourceMeter® Instrument Reference Manual
A function that returns most elements in a string convenient for printing
Identifying tag for this pulse train
The SMU configured for pulsing
Pulse function:
smuX.OUTPUT_DCAMPS or
smuX.OUTPUT_DCVOLTS
Pulse bias level
Pulse level for non sweeping pulses
Starting level for sweep pulses
Ending level for sweep pulses
Limit value
On time in seconds
Off time in seconds
The number of points in this pulse train
Reference to buffer containing measurement data
The sync_in digio line, if used
The sync_out digio line, if used
A table containing the source value for each point in the pulse train
2651A-901-01 Rev. A / March 2011