Lan.trigger[N].Event_Id; Lan.trigger[N].Ipaddress - Keithley 2651A Reference Manual

Section 7: Command reference

lan.trigger[N].EVENT_ID

This constant is the event identifier used to route the LAN trigger to other subsystems (using stimulus properties).
Type TSP-Link accessible
Constant Yes
Usage
lan.trigger[N].EVENT_ID
N
Details
Set the stimulus of any trigger event detector to the value of this constant to have it respond to incoming LAN
trigger packets.
Example
digio.trigger[14].stimulus =
lan.trigger[1].EVENT_ID
Also see
None

lan.trigger[N].ipaddress

This attribute specifies the address (in dotted-decimal format) of UDP or TCP listeners.
Type TSP-Link accessible
Attribute (RW) Yes
Usage
ipAddress = lan.trigger[N].ipaddress
lan.trigger[N].ipaddress = ipAddress
ipAddress
N
Details
Sets the IP address for outgoing trigger events.
Set to "0.0.0.0" for multicast.
After changing this setting, the lan.trigger[N].connect() command must be called before outgoing
messages can be sent.
7-126
Model 2651A High Power System SourceMeter® Instrument Reference Manual
Affected by
The LAN event number (1 to 8)
Affected by
Instrument reset
LAN trigger N reset
The LAN address for this attribute as a string in dotted decimal notation
A number specifying the LAN event number (1 to 8)
Where saved Default value
Route occurrences of triggers
on LAN trigger 1 to digital I/O
trigger 14.
Where saved Default value
Not saved "0.0.0.0"
2651A-901-01 Rev. A / March 2011