Tsplink.group; Tsplink.master; Tsplink.node - Keithley 2651A Reference Manual

Model 2651A High Power System SourceMeter® Instrument Reference Manual
Also see
trigger.clear()

tsplink.group

This attribute is the group number of a TSP-Link node used for DTNS.
Type TSP-Link accessible
Attribute (RW) Yes
Usage
groupNumber = tsplink.group
tsplink.group = groupNumber
groupNumber
Details
To remove the node from all groups, set the attribute value to 0.
When the node is turned off, the group number for that node changes to 0.
Also see
None

tsplink.master

This attribute reads the node number assigned to the master node.
Type TSP-Link accessible
Attribute (R) Yes
Usage
masterNodeNumber = tsplink.master
masterNodeNumber
Also see
None

tsplink.node

This attribute defines the node number.
Type TSP-Link accessible
Attribute (RW) Yes
2651A-901-01 Rev. A / March 2011
(on page 7-338)
Affected by
Not applicable
The group number of the TSP-Link node (0 to 64)
Affected by
Not applicable
The node number of the master node
Affected by
Not applicable
Where saved Default value
Not saved 0
Where saved Default value
Not applicable Not applicable
Where saved Default value
Nonvolatile 1
memory
Section 7: Command reference
7-347