Model 2651A High Power System SourceMeter® Instrument Reference Manual
Viewing the network settings
To view the active network settings:
1. From the front panel, press the MENU key, and then select LAN > STATUS.
2. Use the navigation wheel
•
IP-ADDRESS
•
GATEWAY
•
SUBNET-MASK
•
METHOD
•
DNS
•
MAC-ADDRESS
3. Press the ENTER key to view the active setting.
4. Press the EXIT (LOCAL) key once to return to the STATUS menu.
Confirming the active speed and duplex negotiation
The Model 2651A automatically detects the speed and duplex negotiation active on the LAN. Once
the speed and duplex negotiation is detected, the instrument automatically adjusts its own settings to
match the LAN settings.
To confirm the active LAN speed and duplex mode:
1. From the front panel, press the MENU key.
2. Select LAN > STATUS.
3. Use the navigation wheel
•
SPEED
•
DUPLEX
4. Press the ENTER key to view the active setting.
5. Press the EXIT (LOCAL) key once to return to the STATUS menu
2651A-901-01 Rev. A / March 2011
to select one of the following network settings:
to select one of the following:
Appendix C: LAN concepts and settings
C-13