Digio.trigger[N].Reset(); Digio.trigger[N].Stimulus - Keithley 2651A Reference Manual

Model 2651A High Power System SourceMeter® Instrument Reference Manual
Also see
digio.trigger[N].pulsewidth

digio.trigger[N].reset()

This function resets trigger values to their factory defaults.
Type TSP-Link accessible
Function Yes
Usage
digio.trigger[N].reset()
N
Details
This function resets the following attributes to factory default settings:
•
digio.trigger[N].mode
•
digio.trigger[N].pulsewidth
•

digio.trigger[N].stimulus

It also clears digio.trigger[N].overrun.
Also see
digio.trigger[N].mode
digio.trigger[N].overrun
digio.trigger[N].pulsewidth
digio.trigger[N].stimulus
digio.trigger[N].stimulus
This attribute selects the event that causes a trigger to be asserted on the digital output line.
Type TSP-Link accessible
Attribute (RW) Yes
Usage
triggerStimulus = digio.trigger[N].stimulus
digio.trigger[N].stimulus = triggerStimulus
triggerStimulus
N
2651A-901-01 Rev. A / March 2011
(on page 7-48)
Affected by
Digital I/O trigger line (1 to 14)
(on page 7-46)
(on page 7-47)
(on page 7-48)
(on page 7-49)
Affected by
Instrument reset
Digital I/O trigger N reset
The event identifier for the triggering event
Digital I/O trigger line (1 to 14)
Where saved Default value
Where saved Default value
Not saved 0
Section 7: Command reference
7-49