Status.reset(); Status.standard - Keithley 2651A Reference Manual

Section 7: Command reference

status.reset()

This function resets all bits in the system status model.
Type TSP-Link accessible
Function Yes
Usage
status.reset()
Details
This function clears all status data structure registers (enable, event, NTR, and PTR) to their default values. For
information about .condition, .enable, .event, .ntr, and .ptr registers, refer to
and Enable and transition registers
Example
status.reset()
Also see
Status Model

status.standard.*

These attributes manage the status model's standard event status register set.
Type TSP-Link accessible
Attribute - -
.condition (R) Yes
.enable (RW) Yes
.event (R) Yes
.ntr (RW) Yes
.ptr (RW) Yes
Usage
standardRegister = status.standard.condition
standardRegister = status.standard.enable
standardRegister = status.standard.event
standardRegister = status.standard.ntr
standardRegister = status.standard.ptr
status.standard.enable = standardRegister
status.standard.ntr = standardRegister
status.standard.ptr = standardRegister
standardRegister
7-312
Model 2651A High Power System SourceMeter® Instrument Reference Manual
Affected by
(on page E-18).
(on page E-1)
Affected by
- -
Not applicable
Status reset
Status reset
Status reset
Status reset
The standard event status register's status. A zero (0) indicates no bits set (also
send 0 to clear all bits); other values indicate various bit settings
Where saved Default value
Status register sets
Resets the instrument status model.
Where saved Default value
- - - -
Not saved Not applicable
Not saved 0
Not saved 0
Not saved 0
Not saved 253 (All bits set)
2651A-901-01 Rev. A / March 2011
(on page E-2)