Table of Contents
Advertisement
Section 7: Command reference
Example
smua.source.offlimiti = 10e-3
Also see
smuX.source.offfunc
smuX.source.offmode
smuX.source.offmode
This attribute sets the source output-off mode.
Type
TSP-Link accessible
Attribute (RW)
Yes
Usage
sourceOffMode = smuX.source.offmode
smuX.source.offmode = sourceOffMode
sourceOffMode
X
7-220
Model 2651A High Power System SourceMeter® Instrument Reference Manual
(on page 7-218)
(on page 7-220)
Affected by
SMU reset
Instrument reset
Recall
The output-off setting; set to one of the following values:
0 or smuX.OUTPUT_NORMAL: Configures the source function according to
smuX.source.offfunc attribute.
1 or smuX.OUTPUT_ZERO: Configures source to output 0 V as
smuX.OUTPUT_NORMAL but has different compliance handling (see the Details
below)
2 or smuX.OUTPUT_HIGH_Z: Opens the output relay when the output is turned off
Source-measure unit (SMU) channel (for example, smua.source.offmode
applies to SMU channel A)
Changes the normal output-off
mode limit to 10 mA for SMU
channel A.
Where saved
Default value
Saved setups
smuX.OUTPUT_NORMAL
2651A-901-01 Rev. A / March 2011
Advertisement
Table of Contents
Troubleshooting
