Display.trigger.overrun; Display.trigger.wait() - Keithley 2651A Reference Manual

Model 2651A High Power System SourceMeter® Instrument Reference Manual
Usage
eventID = display.trigger.EVENT_ID
eventID
Details
Set the stimulus of any trigger event detector to the value of this constant to have it respond to front panel trigger
events.
Also see
None

display.trigger.overrun

This attribute contains the event detector overrun status.
Type TSP-Link accessible
Attribute (R) Yes
Usage
overrun = display.trigger.overrun
overrun
Details
Indicates if a trigger event was ignored because the event detector was already in the detected state when the
TRIG button was pressed.
Indicates the overrun state of the event detector built into the display.
This attribute does not indicate whether an overrun occurred in any other part of the trigger model or in any other
detector that is monitoring the event.
Example
overrun = display.trigger.overrun
Also see
display.trigger.clear()

display.trigger.wait()

This function waits for the TRIG key on the front panel to be pressed.
Type TSP-Link accessible
Function Yes
2651A-901-01 Rev. A / March 2011
The trigger event number
Affected by
Display trigger clear
Instrument reset
The trigger overrun state
(on page 7-72)
Affected by
Where saved Default value
Not saved false
Sets the variable overrun equal to the
present state of the event detector built into
the display.
Where saved Default value
Section 7: Command reference
7-73