Keithley 2651A Reference Manual page 62

Section 2: General operation
To save a user setup to an external USB flash drive:
1. Configure the Model 2651A for the desired operating modes to be saved.
2. Insert the USB flash drive into the USB port on the front panel of the Model 2651A.
3. Press the MENU key, then select SETUP, then press the ENTER key.
4. Select SAVE menu item, then press the ENTER key.
5. Select USB1. The file setup000.set is displayed.
6. Turn the navigation wheel
ENTER key.
Recalling a saved setup
You can recall setups from internal nonvolatile memory or a USB flash drive at any time. To recall a
saved setup:
1. Press the MENU key to access the main menu.
2. Select SETUP, and then press the ENTER key.
3. Select the RECALL menu item, and then press the ENTER key.
4. Select one of the following:
•
INTERNAL
•
USB1
5. (INTERNAL only) Do one of the following:
•
Select the user number (1 through 5), then press the ENTER key.
• Select FACTORY to restore factory defaults, then press the ENTER key.
6. (USB1 only) Select the appropriate file and then press the ENTER key.
Start-up configuration
You can specify the Model 2651A start-up (power-on) configuration from the front panel. Set the
start-up configuration to a previously stored setup (recalled from internal nonvolatile memory) or reset
to the factory default setup. To select the power-on setup:
1. Press the MENU key to access the main menu.
2. Select SETUP, and then press the ENTER key.
3. Select POWERON, and then press the ENTER key.
4. Do one of the following:
•
Select FACTORY to load the original defaults.
• Select USER NUMBER (1 through 5) to load a user preference.
5. Press the ENTER key.
6. Press the EXIT (LOCAL) key to return to the main menu.
2-40
Model 2651A High Power System SourceMeter® Instrument Reference Manual
to change the last three digits of the file name and then press the
2651A-901-01 Rev. A / March 2011