Display.smux.digits; Display.smux.measure.func - Keithley 2651A Reference Manual

Model 2651A High Power System SourceMeter® Instrument Reference Manual
Also see
display.clear()
display.getcursor()
display.gettext()
display.screen
display.setcursor()

display.smuX.digits

This attribute sets the display resolution of the selected measurement.
Type TSP-Link accessible
Attribute (RW) Yes
Usage
digits = display.smuX.digits
display.smuX.digits = digits
digits
X
Details
This attribute sets the display resolution.
Example
display.smua.digits = display.DIGITS_5_5
Also see
Display resolution

display.smuX.measure.func

This attribute specifies the type of measurement being displayed.
Type TSP-Link accessible
Attribute (RW) Yes
2651A-901-01 Rev. A / March 2011
(on page 7-54)
(on page 7-56)
(on page 7-58)
(on page 7-67)
(on page 7-69)
Affected by
Instrument reset
Recall
Set digits to one of the following values:
• Select 4-1/2 digit resolution (4 or display.DIGITS_4_5)
•
Select 5-1/2 digit resolution (5 or display.DIGITS_5_5)
• Select 6-1/2 digit resolution (6 or display.DIGITS_6_5)
SMU channel (smua)
(on page 3-72)
Affected by
Instrument reset
Recall
Where saved Default value
Saved setups display.DIGITS_5_5
Select 5-1/2 digit resolution for SMU A.
Where saved Default value
Saved setups display.MEASURE_DCVOLTS
Section 7: Command reference
7-71