Step 3: Configure The Instrument's Lan Settings - Keithley 2651A Reference Manual

Model 2651A High Power System SourceMeter® Instrument Reference Manual
2. Select Use the following IP address. The option for "Use the following DNS server addresses"
is automatically selected.
3. Set the IP address:
a. Are the IP address and subnet mask fields populated?
•
•
b. After recording or entering the IP address, click OK.
4. Click OK to close the Local Area Connection Properties dialog box.
5. Close the Network Connections window.
2651A-901-01 Rev. A / March 2011
Yes: If populated, record the IP address, subnet mask, default gateway, and DNS servers to use in

Step 3: Configure the Instrument's LAN settings

No: If blank, enter the IP address 192.168.1.100 in the IP address field and 255.255.255.0 in the
subnet mask field. These will be used to configure the instrument's LAN settings.
Figure 121: Internet protocol (TCP/IP) Properties dialog box
Appendix C: LAN concepts and settings
(on page C-6).
192 . 168 . 1 . 100
255 . 255 . 255 . 0
C-5