Tsplink.trigger[N].Clear() - Keithley 2651A Reference Manual

Model 2651A High Power System SourceMeter® Instrument Reference Manual
Usage
tsplink.trigger[N].assert()
N
Details
The set pulse width determines how long the trigger is asserted.
Example
tsplink.trigger[2].assert()
Also see

tsplink.trigger[N].clear()

tsplink.trigger[N].mode
tsplink.trigger[N].overrun
tsplink.trigger[N].pulsewidth
tsplink.trigger[N].release()
tsplink.trigger[N].stimulus
tsplink.trigger[N].wait()
tsplink.trigger[N].clear()
This function clears the event detector for a trigger.
Type TSP-Link accessible
Function Yes
Usage
tsplink.trigger[N].clear()
N
Details
The event detector for a trigger recalls if a trigger event has been detected since the last
tsplink.trigger[N].wait() call. This function clears a trigger event detector, discards the previous history
of the trigger line, and clears the tsplink.trigger[N].overrun attribute.
Example
tsplink.trigger[2].clear()
Also see
tsplink.trigger[N].mode
tsplink.trigger[N].overrun
tsplink.trigger[N].release()
tsplink.trigger[N].stimulus
tsplink.trigger[N].wait()
2651A-901-01 Rev. A / March 2011
The trigger line (1 to 3)
(on page 7-351)
(on page 7-352)
(on page 7-354)
(on page 7-355)
(on page 7-355)
(on page 7-357)
(on page 7-358)
Affected by
The trigger line (1 to 3)
(on page 7-352)
(on page 7-354)
(on page 7-355)
(on page 7-357)
(on page 7-358)
Asserts trigger on trigger line 2.
Where saved Default value
Clears trigger event on synchronization Line 2.
Section 7: Command reference
7-351