Keithley 2651A Reference Manual page 282

Section 6: Instrument programming
To send commands from the command line:
1. Type the command in the console and then press the Enter key.
2. (Optional) Click Clear to clear the instrument output window.
To create a new script:
1. Click in the script editor window and then type the first line of your script. Then press the Enter
key to advance to line 2.
2. In the TSP Script line, type the name of the script and then click Save Script.
The instrument validates the syntax and then saves the script to the nonvolatile memory.
To remove the code from the script editor:
Click Clear.
To run a script:
1. Select the desired script from the User script window.
2. Click Run.
To stop a running script:
Click Abort Script.
To delete a script from TSB embedded:
You cannot retrieve a deleted script.
1. Select the desired script from the user script window.
2. Click Delete.
To modify a script:
1. Select the desired script from the User Scripts window, and then modify the desired code in the
script editor.
2. Click Save Script to validate the syntax and save the script.
3. The following message is displayed: Script <filename> will be overwritten. Do one of the
following:
• To overwrite the script, click OK.
• To save the script with a new name, click Cancel and then type the name of the script in the name field.
To export a script to be saved on an external drive (or to store as a back-up on your
computer):
1. To export a script, click on the name of the script in the user script window and then click Export
to PC. The Save dialogue box displays.
2. Use the drop-down arrow to change folders, and navigate to the desired file or directory.
3. In the File Name field, type the name of the file and then click Save.
6-38
Model 2651A High Power System SourceMeter® Instrument Reference Manual
NOTE
2651A-901-01 Rev. A / March 2011