Keithley 2651A Reference Manual page 142

Model 2651A High Power System SourceMeter® Instrument Reference Manual
Idle
Configure and enable sweep source or sweep
measure actions, then send:
Arm layer
smuX.trigger.arm.stimulus
Trigger layer
smuX.trigger.source.stimulus
smuX.trigger.measure.stimulus
smuX.trigger.endpulse.stimulus
2651A-901-01 Rev. A / March 2011
Figure 43: Remote trigger model: Normal (synchronous) mode
smuX.trigger.initiate()
Arm event overrun
Source event overrun
Measure event overrun
End pulse event overrun
No
Another
Yes
arm?
Arm
event
detector
End
sweep
action
Source
No
event
detector
Yes
Another
trigger?
Source
action
Measure
event
detector
Measure
action
End pulse
event
detector
End
pulse
action
Section 3: Functions and features
Idle event
smuX.trigger.IDLE_EVENT_ID
Sweeping event
smuX.trigger.SWEEPING_EVENT_ID
Sweep complete event
smuX.trigger.SWEEP_COMPLETE_EVENT_ID
Armed event
smuX.trigger.ARMED_EVENT_ID
Source complete event
smuX.trigger.SOURCE_COMPLETE_EVENT_ID
Measure complete event
smuX.trigger.MEASURE_COMPLETE_EVENT_ID
Pulse complete event
smuX.trigger.PULSE_COMPLETE_EVENT_ID
3-35