Timer.reset(); Trigger.blender[N].Clear() - Keithley 2651A Reference Manual

Model 2651A High Power System SourceMeter® Instrument Reference Manual
Example 2
beeper.beep(0.5, 2400)
print("reset timer")

timer.reset()

delay(0.5)
dt = timer.measure.t()
print("timer after delay:", dt)
beeper.beep(0.5, 2400)
Also see
timer.reset()
timer.reset()
This function resets the timer to zero (0) seconds.
Type TSP-Link accessible
Function Yes
Usage
timer.reset()
Example
timer.reset()
-- (intervening code)
time = timer.measure.t()
print(time)
Also see
timer.measure.t()

trigger.blender[N].clear()

This function clears the blender event detector and resets blender N.
Type TSP-Link accessible
Function Yes
Usage
trigger.blender[N].clear()
N
2651A-901-01 Rev. A / March 2011
(on page 7-333)
Affected by
(on page 7-332)
Affected by
The blender number (1 to 4)
Sets the beeper, resets the timer, sets a delay, then
verifies the time of the delay before the next beeper.
Output:
reset timer
timer after delay: 5.00e-01
Where saved Default value
Resets the timer and then measures the time since
the reset.
Output:
1.469077e+01
The above output indicates that
timer.measure.t() was executed 14.69077
seconds after timer.reset().
Where saved Default value
Section 7: Command reference
7-333