Tsplink.trigger[N].Reset() - Keithley 2651A Reference Manual

Section 7: Command reference
Details
Releases a trigger that was asserted with an indefinite pulse width, as well as a trigger that was latched in
response to receiving a synchronous mode trigger.
Example
tsplink.trigger[3].release()
Also see
tsplink.trigger[N].assert()
tsplink.trigger[N].clear()
tsplink.trigger[N].mode
tsplink.trigger[N].overrun
tsplink.trigger[N].pulsewidth
tsplink.trigger[N].stimulus
tsplink.trigger[N].wait()

tsplink.trigger[N].reset()

This function resets some of the TSP-Link
Type TSP-Link accessible
Function Yes
Usage
tsplink.trigger[N].reset()
N
Details
The tsplink.trigger[N].reset() function resets the following attributes to their factory defaults:
•
tsplink.trigger[N].mode
•
tsplink.trigger[N].stimulus
•
tsplink.trigger[N].pulsewidth
This also clears tsplink.trigger[N].overrun.
Also see
tsplink.trigger[N].pulsewidth
tsplink.trigger[N].mode
tsplink.trigger[N].overrun
tsplink.trigger[N].stimulus
7-356
Model 2651A High Power System SourceMeter® Instrument Reference Manual
(on page 7-350)
(on page 7-351)
(on page 7-352)
(on page 7-354)
(on page 7-355)
(on page 7-357)
(on page 7-358)
®
trigger settings to their factory defaults.
Affected by
The trigger line (1 to 3)
(on page 7-355)
(on page 7-352)
(on page 7-354)
(on page 7-357)
Releases trigger Line 3.
Where saved Default value
2651A-901-01 Rev. A / March 2011