Display.trigger.clear(); Display.trigger.event_Id - Keithley 2651A Reference Manual

Section 7: Command reference
Usage
func = display.smuX.measure.func
display.smuX.measure.func = func
func
X
Details
Selects the displayed measurement function: Amperes, volts, ohms, or watts.
Example
display.smua.measure.func =
display.MEASURE_DCAMPS
Also see
None

display.trigger.clear()

This function clears the front panel trigger event detector.
Type TSP-Link accessible
Function Yes
Usage
display.trigger.clear()
Details
The trigger event detector remembers if an event has been detected since the last display.trigger.wait()
call. This function clears the trigger's event detector and discards the previous history of TRIG key presses.
This attribute also clears the display.trigger.overrun attribute.
Also see
display.trigger.overrun
display.trigger.wait()

display.trigger.EVENT_ID

This constant is the event ID of the event generated when the front-panel TRIG key is pressed.
Type TSP-Link accessible
Constant Yes
7-72
Model 2651A High Power System SourceMeter® Instrument Reference Manual
One of the following values:
• 0 or display.MEASURE_DCAMPS: Selects current measure function
•
1 or display.MEASURE_DCVOLTS: Selects volts measure function
•
2 or display.MEASURE_OHMS: Selects ohms measure function
•
3 or display.MEASURE_WATTS: Selects power measure function
Source-measure unit (SMU) channel
Affected by
(on page 7-73)
(on page 7-73)
Affected by
Selects the current measure function for
SMU A.
Where saved Default value
Where saved Default value
2651A-901-01 Rev. A / March 2011