Trigger.blender[N].Overrun; Trigger.blender[N].Reset() - Keithley 2651A Reference Manual

Model 2651A High Power System SourceMeter® Instrument Reference Manual
Also see

trigger.blender[N].reset()

trigger.blender[N].overrun

This attribute indicates whether or not an event was ignored because of the event detector state.
Type TSP-Link accessible
Attribute (R) Yes
Usage
overrun = trigger.blender[N].overrun
overrun
N
Details
Indicates if an event was ignored because the event detector was already in the detected state when the event
occurred. This is an indication of the state of the event detector that is built into the event blender itself.
This attribute does not indicate if an overrun occurred in any other part of the trigger model or in any other trigger
object that is monitoring the event. It also is not an indication of an action overrun.
Example
print(trigger.blender[1].overrun)
Also see
trigger.blender[N].reset()
trigger.blender[N].reset()
This function resets some of the trigger blender settings to their factory defaults.
Type TSP-Link accessible
Function Yes
Usage
trigger.blender[N].reset()
N
2651A-901-01 Rev. A / March 2011
(on page 7-335)
Affected by
Instrument reset
Trigger blender N clear
Trigger blender N reset
Trigger blender overrun state
The trigger event blender (1 to 4)
(on page 7-335)
Affected by
The trigger event blender (1 or 2)
Where saved Default value
Not applicable Not applicable
If an event was ignored, the output
is true; If an event was not ignored,
the output is false.
Where saved Default value
Section 7: Command reference
7-335