Range Programming - Keithley 2651A Reference Manual

Model 2651A High Power System SourceMeter® Instrument Reference Manual

Range programming

Range commands
The following tables summarize commands necessary to control measure and source ranges. See
Remote commands
Measure range commands*
Commands
smua.measure.autorangei = smua.AUTORANGE_ON
smua.measure.autorangei = smua.AUTORANGE_OFF
smua.measure.autorangev = smua.AUTORANGE_ON
smua.measure.autorangev = smua.AUTORANGE_OFF
smua.measure.lowrangei = lowrange
smua.measure.lowrangev = lowrange
smua.measure.rangei = rangeval
smua.measure.rangev = rangeval
* See Available ranges
2651A-901-01 Rev. A / March 2011
(on page 5-1) for more details about these commands.
(on page 2-65).
Section 2: General operation
Description
Enable current measure
autorange.
Disable current measure
autorange.
Enable voltage measure
autorange.
Disable voltage measure
autorange.
Set lowest I measure range for
autorange.
Set lowest V measure range
for autorange.
Select manual current
measure range.
Select manual voltage
measure range.
2-69