Lan.trigger[N].Clear() - Keithley 2651A Reference Manual

Model 2651A High Power System SourceMeter® Instrument Reference Manual
Example
lan.trigger[5].assert()
Also see

lan.trigger[N].clear()

lan.trigger[N].mode
lan.trigger[N].overrun
lan.trigger[N].stimulus
lan.trigger[N].wait()
lan.trigger[N].clear()
This function clears the event detector for a trigger.
Type TSP-Link accessible
Function Yes
Usage
lan.trigger[N].clear()
N
Details
A trigger's event detector remembers if an event has been detected since the last call. This function clears a
trigger's event detector and discards the previous history of the trigger packet.
This function clears all overruns associated with this LAN trigger.
Example
lan.trigger[5].clear()
Also see
lan.trigger[N].assert()
lan.trigger[N].overrun
lan.trigger[N].stimulus
lan.trigger[N].wait()
2651A-901-01 Rev. A / March 2011
(on page 7-123)
(on page 7-127)
(on page 7-128)
(on page 7-130)
(on page 7-131)
Affected by
The LAN event number to clear (1 to 8)
(on page 7-122)
(on page 7-128)
(on page 7-130)
(on page 7-131)
Creates a trigger with LAN packet 5.
Where saved Default value
Clears the event detector with LAN packet 5.
Section 7: Command reference
7-123