Keithley 2651A Reference Manual page 114

Model 2651A High Power System SourceMeter® Instrument Reference Manual
You must clear the reading buffer before you enable or disable the source value or the timestamp
options.
5. Configure the reading buffer's timestamp elements:
a. Turn the navigation wheel
b. Press the navigation wheel
c. Select OFF or ON and then press the navigation wheel
6. Configure the reading buffer's source value elements:
a. Turn the navigation wheel
b. Press the navigation wheel
c. Select OFF or ON.
7. Press the EXIT (LOCAL) key to return to the main menu.
Reading buffer options
The following listing outlines the menus and menu items associated with front panel reading buffer
control. This section provides a description for the reading buffer options.
•
DEST: Sets data storage destination (buffer 1, buffer 2, or NONE).
•
BUFFER1: Configure buffer 1.
•
CLEAR: Clear buffer (YES or NO).
• ELEMENTS: Enable (ON) or disable (OFF) data storage elements:
•
•
•
BUFFER2: Configure buffer 2.
•
CLEAR: Clear buffer (YES or NO).
• ELEMENTS: Enable (ON) or disable (OFF) data storage elements:
•
•
Appending or overwriting existing reading buffers
When storing data to a reading buffer that already holds data, the new data can be appended to the
reading buffer data, or it can overwrite the old data.
2651A-901-01 Rev. A / March 2011
SRC-VAL: Enable source values.
TSTAMP: Enable timestamps.
SRC-VAL: Enable source values.
TSTAMP: Enable timestamps.
NOTE
to highlight TSTAMP.
(or the ENTER key).
to highlight SRC-VAL.
(or the ENTER key).
Section 3: Functions and features
(or the ENTER key).
3-7