Io.write(); Lan.applysettings() - Keithley 2651A Reference Manual

Model 2651A High Power System SourceMeter® Instrument Reference Manual
Also see
io.open() (on page 7-100)

io.write()

This function writes data to the default output file.
Type TSP-Link accessible
Function Yes
Usage
io.write()
io.write(data1)
io.write(data1, data2)
io.write(data1, ..., dataN)
data1
data2
dataN
...
Details
All data parameters must be either strings or numbers.
Data is not immediately written to a file when you use the io.write() function. The io.write()
function buffers data; it may not be written to the USB drive immediately. Use the io.flush()
function to immediately write buffered data to the drive.
Also see
io.flush() (on page 7-99)

lan.applysettings()

This function re-initializes the LAN interface with new settings.
Type TSP-Link accessible
Function Yes
Usage
lan.applysettings()
2651A-901-01 Rev. A / March 2011
Affected by
The data to be written
The data to be written
The data to be written
One or more values separated by commas
NOTE
Affected by
Where saved Default value
Where saved Default value
Section 7: Command reference
7-103