Section 7: Command reference
errorqueue.clear()
This function clears all entries out of the error queue.
Type
TSP-Link accessible
Function
Yes
Usage
errorqueue.clear()
Details
See the Reading error messages and Status model topics for additional information on the error queue.
Also see
errorqueue.count
errorqueue.next()
Reading errors
Status model
errorqueue.count
This attribute gets the number of entries in the error queue.
Type
TSP-Link accessible
Attribute (R)
Yes
Usage
count = errorqueue.count
count
Example
count = errorqueue.count
print(count)
Also see
errorqueue.clear()
errorqueue.next()
7-76
Model 2651A High Power System SourceMeter® Instrument Reference Manual
Affected by
(on page 7-76)
(on page 7-77)
(on page 8-2)
(on page E-1)
Affected by
Power cycle
Clearing error queue
Reading error messages
The number of entries in the error queue
(on page 7-76)
(on page 7-77)
Where saved
Default value
Where saved
Default value
Not applicable
Not applicable
Returns the number of entries in the error
queue.
The output below indicates that there are
four entries in the error queue:
4.00000e+00
2651A-901-01 Rev. A / March 2011