Lan.timedwait; Lan.trigger[N].Assert() - Keithley 2651A Reference Manual

Section 7: Command reference

lan.timedwait

This attribute contains the LAN timed-wait state interval.
Type TSP-Link accessible
Attribute (RW) Yes
Usage
timeout = lan.timedwait
lan.timedwait = timeout
timeout
Details
This attribute controls the amount of time that resources are allocated to closed TCP connections. When a TCP
connection is closed, the connection is put in a timed-wait state and resources remain allocated for the
connection until the timed-wait state ends. During the timed-wait interval, the instrument processes delayed
packets that arrive after the connection is closed.
Use this attribute to tailor the timed-wait state interval for the instrument.
Also see
lan.restoredefaults()

lan.trigger[N].assert()

This function simulates the occurrence of the trigger and generates the corresponding event ID.
Type TSP-Link accessible
Function Yes
Usage
lan.trigger[N].assert()
N
Details
Generates and sends a LAN trigger packet for the LAN event number specified.
Sets the pseudostate to the appropriate state.
The following indexes provide the listed events:
•
1:LAN0
•
2:LAN1
•
3:LAN2
• ...
•
8:LAN7
7-122
Model 2651A High Power System SourceMeter® Instrument Reference Manual
Affected by
LAN restore defaults
The LAN timed-wait state interval in seconds.
(on page 7-114)
Affected by
The LAN event number (1 to 8)
Where saved Default value
Nonvolatile memory 20
Where saved Default value
2651A-901-01 Rev. A / March 2011