Tsplink.trigger[N].Pulsewidth; Tsplink.trigger[N].Release() - Keithley 2651A Reference Manual

Model 2651A High Power System SourceMeter® Instrument Reference Manual
Also see
tsplink.trigger[N].assert()
tsplink.trigger[N].clear()
tsplink.trigger[N].mode

tsplink.trigger[N].release()

tsplink.trigger[N].reset()
tsplink.trigger[N].stimulus
tsplink.trigger[N].wait()

tsplink.trigger[N].pulsewidth

This attribute the length of time that the trigger line is asserted for output triggers.
Type TSP-Link accessible
Attribute (RW) Yes
Usage
width = tsplink.trigger[N].pulsewidth
tsplink.trigger[N].pulsewidth = width
width
N
Details
Setting the pulse width to 0 (seconds) asserts the trigger indefinitely.
Example
tsplink.trigger[3].pulsewidth = 20e-6 Sets pulse width for trigger line 3 to 20 μs.
Also see
tsplink.trigger[N].release()
tsplink.trigger[N].release()
This function releases a latched trigger on the given TSP-Link trigger line.
Type TSP-Link accessible
Function Yes
Usage
tsplink.trigger[N].release()
The trigger line (1 to 3)
N
2651A-901-01 Rev. A / March 2011
(on page 7-350)
(on page 7-351)
(on page 7-352)
(on page 7-355)
(on page 7-356)
(on page 7-357)
(on page 7-358)
Affected by
Instrument reset
TSP-Link trigger N reset
The pulse width (in seconds)
The trigger line (1 to 3)
(on page 7-355)
Affected by
Where saved
Not saved
Where saved Default value
Section 7: Command reference
Default value
10-e6
7-355